Hi Again , A new small query on frame-relay itself. Is the config below valid and can it be used having both Multipoint on main interface and poin-to-point sub interface simutaneusly.
int serial 0 encap frame-relay ip address frame-relay interface-dlci 16 int serial 0/0.2 multi ip address frame-relay map 17 Does such conguration can work or the Muti access config on main interface will afffect the sub interfaces connections also. What implications the above design has or all 3 connections can be made to work any help will be appreciated. Thanx in advance Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=63460&t=63460 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]