First of all, what WAN technology will you be using. FR or PPP T1. Mulitpoint on FR will have a network type non-broadcast and will not neighbor to a router on point to point interface which will have network type point to point. Either you change your point to point network type to non-broadcast and use neighbor command on your hub router or change multipoint interface to point-to-point.--- On Thu 02/20, Monu Sekhon < [EMAIL PROTECTED] > wrote:From: Monu Sekhon [mailto: [EMAIL PROTECTED]: [EMAIL PROTECTED]: Fri, 21 Feb 2003 02:06:14 GMTSubject: Effect of Multipoint config on point-to-point [7:63460]Hi Again ,A new small query on frame-relay itself.Is the config below valid and can it be used having both Multipoint on maininterface and poin-to-point sub interface simutaneusly.int serial 0encap frame-relayip address frame-relay interface-dlci 16int serial 0/0.2 multiip address frame-relay map 17Does such conguration can work or the Muti access config on main interfacewill afffect the sub interfaces connections also.What implications the above design has or all 3 connections can be made toworkany help will be appreciated.Thanx in advance Message Posted at:http://www.groupstudy.com/form/read.php?f=7&i=63460&t=63460--------------------------------------------------FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.htmlReport misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_______________________________________________ Join Excite! - http://www.excite.com The most personalized portal on the Web! Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=63534&t=63460 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]