The physical interface cannot be used as an active connection if the sub-interfaces are configured and used, I believe...
The below might be bettter... > > int serial 0 > encap frame-relay > no shut > int serial 0.10 multi > no shut > ip address x.x.x.x > frame-relay map ip x.x.x.x 17 Larry Letterman Network Engineer Cisco Systems > Hi Again , > A new small query on frame-relay itself. > Is the config below valid and can it be used having both Multipoint on main > interface and poin-to-point sub interface simutaneusly. > > int serial 0 > encap frame-relay > ip address > > frame-relay interface-dlci 16 > > int serial 0/0.2 multi > ip address > frame-relay map 17 > > Does such conguration can work or the Muti access config on main interface > will afffect the sub interfaces connections also. > What implications the above design has or all 3 connections can be made to > work > any help will be appreciated. > Thanx in advance [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=63485&t=63460 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
