Pete, I assign an ip address from my ISP to a terminal server (2511) and let it be accessible from the internet. I then add console connects from each of my routers and switches to the 2511. which allows me to access the lab from anywhere I have internet access at...In your case you may need to telnet thru the dsl router to your lab with something like Nat/Pat...
Larry Letterman Network Engineer Cisco Systems ----- Original Message ----- From: "Pete Nugent" To: Sent: Tuesday, February 25, 2003 4:06 PM Subject: Lab setup [7:63809] > Hi guys > > Just bought a lab and iv been reading some posts here and there are alot of > great guys and ladies aswell. Passed my CCNA but im struggling with the best > way to set up my lab for CCNP as I get a DHCP issued IP address from my ISP. > If this is a fundamental question I apologise as all my CCNA stuff was self > study and sims now I want to mess with the products. > > 2 x 2501 and a 2503 can I can I configure the serial port for dhcp.or do I > need to configure he ethernet port for dhcp. Im sure ive seen this done. Any > help with setting up the lab scenarios etc would be great [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=63819&t=63809 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
