Here is the gist of how I have mine setup.. I have a 2621 that I use for a firewall it works great. FastE0/0 -> Cable Modem -> internet FastE0/1 isl-trunk-> Switch
interface FastEthernet0/0 description Cable Modem Access Point ip address dhcp client-id FastEthernet0/0 ; Hi guys > > Just bought a lab and iv been reading some posts here and there are > alot of great guys and ladies aswell. Passed my CCNA but im struggling > with the best way to set up my lab for CCNP as I get a DHCP issued IP > address from my ISP. If this is a fundamental question I apologise as > all my CCNA stuff was self study and sims now I want to mess with the > products. > > 2 x 2501 and a 2503 can I can I configure the serial port for dhcp.or > do I need to configure he ethernet port for dhcp. Im sure ive seen this > done. Any help with setting up the lab scenarios etc would be great > Nondisclosure violations to [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=64013&t=63809 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]