>From the cisco website ....

Error Message   
%BGP-5-ADJCHANGE: neighbor [chars][chars][chars][chars] [chars]

Explanation   A BGP neighbor has either come up or gone down. This message
describes the change for the BGP neighbor and appears only if the
log-neighbor-changes command is configured for the BGP process.

Recommended Action   This informational message normally appears as routers
and BGP neighbors go up or down. However, unexpected neighbor loss might
indicate high error rates or high packet loss in the network and should be
investigated.

Error Message   
%BGP-6-ASPATH: [chars] AS path [chars] received from [chars]: [chars]

Explanation   The remote BGP peer has sent in an update with an invalid AS
path.

Recommended Action   Copy the error message exactly as it appears on the
console or in the system log, contact your Cisco technical support
representative, and provide the representative with the gathered information.

Error Message   
%BGP-3-BADROUTEMAP: Bad parameters in the route-map [chars] applied for
[chars]

Explanation   The route map contains parameters that are incompatible with
the intended operation.

Recommended Action   Correct the route map definition.

Error Message   
%BGP-3-BGP_INCONSISTENT: [chars] Inconsistent [chars]

Explanation   An inconsistency in the data structures has been detected.

Recommended Action   This is a rare situation and is the result of an
internal problem. Copy the error message exactly as it appears on the
console or in the system log, contact your Cisco technical support
representative, and provide the representative with the gathered information.

Error Message   
%BGP-3-DELPATH: Attempted to delete path from an empty net for [chars]

Explanation   A BGP path could not be deleted because of an error.

Recommended Action   Copy the error message exactly as it appears on the
console or in the system log, contact your Cisco technical support
representative, and provide the representative with the gathered information.


KW S wrote:
> 
> This is the extract from a show log 
> 
> Feb 26 03:37:28: %BGP-3-NOTIFICATION: received from neighbor
> 203.162.129.39 4/0 (hold time expired) 0 bytes
> 
> Feb 26 03:37:28: %BGP-5-ADJCHANGE: neighbor 203.162.129.39 Down
> BGP Notification received
> 
> Feb 26 03:46:44: %BGP-5-ADJCHANGE: neighbor 203.162.129.39 Up
> 
> 1. what is the meaning of BGP-3-notification
> 2. what is the meaning of BGP-5-adjchange
> 3. Is there a way to tell what is the error code in this
> notification message ?
> 
> Can anyone explain the above to me
> 
> Thanks a lot
> 
> kws 
>  


Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=63851&t=63847
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to