Jim Gifford schrieb:
>Also the output of this following commands
>echo $CLFS_HOST $CLFS_TARGET $CLFS_TARGET32
>echo $BUILD32 $BUILD64 $CFLAGS
>gcc -v
>
>What type of Motherboard, manufacture/model #?
>Post your kernel config to http://pastebin.cross-lfs.org
>
>
>
>
>_______________________________________________
>Clfs-support mailing list
>[email protected]
>http://ninja.linux-phreak.biz/mailman/listinfo/clfs-support
>
>
>
under the build-system (lfs-livecd x86_64...pre1) this vars are:
LFS_HOST="`echo ${MACHTYPE} | sed -e 's/unknown/cross/g' -e 's/-pc-/-cross-/g'`"
LFS_TARGET="x86_64-unknown-linux-gnu"
LFS_TARGET32="i686-pc-linux-gnu"
BUILD32="-m32"
BUILD64="-m64"
CFLAGS=n/a
gcc -v
Using built-in specs.
Target: x86_64-unknown-linux-gnu
Configured with: ../gcc-4.1.1/configure --prefix=/usr --libdir=/usr/lib64
--libexecdir=/usr/lib64 --enable-shared --enable-threads=posix
--enable-__cxa_atexit --enable-c99 --enable-long-long --enable-clocale=gnu
--enable-languages=c,c++ --disable-libstdcxx-pch
Thread model: posix
gcc version 4.1.1
lspci
0000:00:00.0 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
0000:00:00.1 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
0000:00:00.2 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
0000:00:00.3 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
0000:00:00.4 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
0000:00:00.7 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge
[K8T800/K8T890 South]
0000:00:0a.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit
Ethernet Controller (rev 13)
0000:00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID
Controller (rev 80)
0000:00:0f.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 81)
0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 81)
0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 81)
0000:00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 81)
0000:00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge
[KT600/K8T800/K8T890 South]
0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc.
VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Address Map
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
DRAM Controller
0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128 PF/PRO
AGP 4x TMDS
asus a8v deluxe temporary with 1 ram-modul 512mb
hdparm -i /dev/hda
/dev/hda:
Model=SAMSUNG SP0842N, FwRev=BH100-35, SerialNo=S0DWJ20L397281
Config={ Fixed }
RawCHS=16383/16/63, TrkSize=34902, SectSize=554, ECCbytes=4
BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=66055248
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=no WriteCache=enabled
Drive conforms to: unknown: ATA/ATAPI-1 ATA/ATAPI-2 ATA/ATAPI-3 ATA/ATAPI-4
ATA/ATAPI-5 ATA/ATAPI-6 ATA/ATAPI-7
* signifies the current active mode
drive is 3 days old
kernel's .config is posted
_______________________________________________
Clfs-support mailing list
[email protected]
http://ninja.linux-phreak.biz/mailman/listinfo/clfs-support
