On Wed, 2005-20-04 at 10:58 -0600, Jarrod Major wrote: > > As for your sound card, what is it? Is it supported by ALSA? Of > > interest to me > > are your loaded modules (lsmod) and the output of lspci -v as well as > > anything > > relevant from /var/log/dmesg, syslog etc. > > I'll have to do this from home tonight, I don't have my laptop with me, > almost brought it in today... hurm. I can't remember off the top of my head > but I was pretty sure it was supported by ALSA. When I had SuSE installed on > my laptop, I went into some audio configuration tool (again, not sure which > off the top of my head but it was definitely in YaST). I do know that the > card is a Yamaha OPL3 (or some variant, this Toughbook uses NeoMagic for > display and audio if memory serves and as such is a real bitch to deal > with). Then I had to go in and manually feed the IRQ's and memory addresses > for the various sound bits.
Try following these instructions: http://www.alsa-project.org/alsa- doc/doc-php/template.php?company=Yamaha&card=UX256.&chip=YMF701%2C +YMF711%2C+YMF715%2C+YMF718%2C+YMF719%2C+OPL3+SA2%2C+OPL3 +SA3&module=opl3-sa2 or at least the relevant parts since you won't have to reinstall alsa or anything. You should also try running through alsaconfig which is a nice text based gui for setting up alsa. Jesse _______________________________________________ clug-talk mailing list [email protected] http://clug.ca/mailman/listinfo/clug-talk_clug.ca Mailing List Guidelines (http://clug.ca/ml_guidelines.php) **Please remove these lines when replying
