Should be able to use SS lag screws. Most boats have a nice piece of plywood
there. Drill the hole and you'll see.
Dennis C.
Touche' 35-1 #83
Mandeville, LA
>________________________________
> From: "broo...@aol.com" <broo...@aol.com>
>To: cnc-list@cnc-list.com
>Sent: Friday, August 2, 2013 9:12 AM
>Subject: Stus-List head replacement
>
>
>
>Plan to replace CW with a Jabsco Twist and Lock. What suggestions do listers
>have for bolting this in place. There does not seem to be any access under the
>platform the current head is on. Toggle bolts have been suggested. Or
>creating an inspection port for placement of nuts/washers. Is there anything
>under there I need to worry about damaging? Thanks.
>
>Bev Genader Bob Morgan
>C&C 37
>_______________________________________________
>This List is provided by the C&C Photo Album
>http://www.cncphotoalbum.com
>CnC-List@cnc-list.com
>
>
>
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
