The fall. I opened the y valve to make sure it was not overflowing. Joel Aronson
On Aug 5, 2013, at 8:21 PM, Jake Brodersen <captain_j...@cox.net> wrote: Joel, When was the last time you pumped out??? Jake *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com<cnc-list-boun...@cnc-list.com>] *On Behalf Of *Joel Aronson *Sent:* Monday, August 05, 2013 3:09 PM *To:* cnc-list@cnc-list.com *Subject:* Re: Stus-List Waste fitting stuck Bent one side of the spanner. It slips out unless there is a lot of pressure (a foot) on it. There was nothing unusual looking, so I did not take a photo. On Mon, Aug 5, 2013 at 3:02 PM, Josh Muckley <muckl...@gmail.com> wrote: Got a picture? What happens with the spanner? Bend/break/slip out? Josh -- _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
