I never get the wire on my hands, so I don't worry about fish hooks.you need to adjust length at the wire end to make that right.my boat was delivered with rope to wire about 40 years ago.the sheaves don't mind some new wire.my lines don't chew on each other.if they did I would change something.if my halyards get that close to the water that floating matters I am in big trouble.hydrophobic, I think steel wire is too
Flipping end for end, really how many of us do that, if it's that bad on one end I just get a new one and with wire to rope that is about every 10-15 years for me.I can handle that _____ From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Josh Muckley Sent: December 2, 2013 1:44 PM To: cnc-list@cnc-list.com Subject: Re: Stus-List halyards again Rope is lighter, DIY, easier on the hand, easier on the sheaves, rope doesn't get fish hooks and won't chew on the other lines as bad. Often times the rope will float depending on the material and may be hydrophobic. You can also flip rope end for end when it starts to get worn or simply freshen up the end. Just my 2 cents, Josh Muckley On Dec 2, 2013 11:32 AM, "Joel Aronson" <joel.aron...@gmail.com> wrote: David, The rope is stretching over the entire 100 foot -plus length. Halyard tension should be adjusted during a race - less downwind, more upwind. You would need to check the sheaves to see if they were changed. Rope compatible sheaves are more V shaped. Rope is more of a DIY project unless you have the tools. You still the need the rope tail. Dyneema is lighter than wire, but I doubt you would notice the difference on a 12,000 boat. Joel 35/3 Annapolis On Mon, Dec 2, 2013 at 11:01 AM, Hoyt, Mike <mike.h...@impgroup.com> wrote: David Have your ruled out slippage of the halyards in the clutches? We have this problem on a number of boats on which I sail. Mike _____ From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of David Knecht Sent: Monday, December 02, 2013 11:58 AM To: CnC CnC discussion list Subject: Stus-List halyards again I was thinking about the recent discussions of new high tech halyards and have a question. The PO replaced my halyards with all rope, but I don't know what kind it is. I have noticed significant changes in sail shape over a day of sailing which I am presuming is stretch. Given the length of a rope halyard for a C&C, the stretch factor seems like a serious issue. If you have 60' of line after uphaul, then 2-4% stretch becomes a significant amount of change in mainsail shape. Those are the kinds of stretch numbers I am seeing for lower tech line. I don't want to have to adjust the halyard during a race when shorthanded. One solution seem to be to use a low stretch line (spectra core, etc.) and the other is wire/rope. It looks like wire-rope is actually less expensive, so what is the down side? Are they less durable? If someone says weight, then I am going to ask for a calculation of the relative weight difference of wire vs rope given the huge mass of aluminum and dacron we all have sticking 40' off the deck. I am hard pressed to believe that small weight difference is significant for non-Americas cup sailors. Dave David Knecht Aries 1990 C&C 34+ New London, CT _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com -- Joel 301 541 <tel:301%20541%208551> 8551 _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com _____ No virus found in this message. Checked by AVG - www.avg.com Version: 2012.0.2247 / Virus Database: 3629/6384 - Release Date: 12/02/13
<<image001.jpg>>
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
