No, aluminum foil. The Mark 1 was the one with the dreaded rollpins for the foils but only on the Unit 1 and above - the Unit 0 had screws.
Thanks for taking a look Andy! From: Andrew Burton Sent: Saturday, January 18, 2014 2:35 PM To: Peter Fell ; cnc-list@cnc-list.com Subject: Re: Stus-List Harken Furler Mark 1 Unit 0 Is that the one with the plastic foil? If so, I think you,re SOL. I had to completely replace mine on the J/80 with a whole new unit. I'll check my J/80 stuff tomorrow. Andy C&C 40 Peregrine Andrew Burton 61 W Narragansett Newport, RI USA 02840 http://sites.google.com/site/andrewburtonyachtservices/ +401 965-5260 On Jan 18, 2014, at 16:25, "Peter Fell" <prf...@gmail.com> wrote: Just wondering if anyone local has a manual and parts list for a Mark 1 Unit 0 furling unit that I could borrow and copy. Looking for parts too. Mine is missing a chunk out of the top of the uppermost foil + the top cap. So I’m looking for a foil piece, cap, possibly foil connector, etc. I’ve got a partial copy of the parts list – looks like might have been a couple versions of this unit. Peter Fell Sidney, BC C&C 27 MkIII _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
