They removed the bubblers from the docks (yesterday) here on the Eastern Shore of Maryland. Time to get to work. Already put new bilge pump in the lowest part of the keel sump - on to a few annual maintenance issues, set the mast, and then go sailing!
Gary ----- Original Message ----- From: Hoyt, Mike To: cnc-list@cnc-list.com Sent: Friday, March 21, 2014 11:09 AM Subject: Re: Stus-List Spring Projects The water is still a bit too solid here for launching From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Joel Aronson Sent: Friday, March 21, 2014 11:57 AM To: cnc-list@cnc-list.com Subject: Re: Stus-List Spring Projects Completed (not by me) Cutlass bearing Re do Max Prop repack stuffing box Paint bottom (next week) (by me) new clutches - port side 2 new thru hulls/seacocks in bow New hoses for head/relocate vented loops for more storage under vee berth Remove/replace plotter Boot stripes - Red/Sapphire Blue Built emergency rudder and MOB pole Still to do: install new triducer replace outhaul and reefing lines finish gybe preventer connect plotter to VHF locate/repair leak (probably from winch) install MOB pole holder a/k/a a piece of PVC Launch in one week!! Joel On Fri, Mar 21, 2014 at 10:23 AM, Stevan Plavsa <stevanpla...@gmail.com> wrote: On Suhana: - Paint boot stripes (brightside or perfection, haven't decided yet but keeping original C&C red/blue/darker blue) - bottom paint - repack stuffing box - dismantle pedestal and inspect steering components, replace/repair as necessary - Ambitious but, repaint pedestal. - exhaust hose replacement - tune up the A4 (all ignition components and install new racor) - replace mast collar - rigging inspection - new halyards - washdown pump - install tank level monitor (thanks Fred) We'll see how much of that I get done. Steve Suhana, C&C 32 Toronto On Fri, Mar 21, 2014 at 10:13 AM, Edd Schillay <e...@schillay.com> wrote: Listers, Now that Spring has finally sprung, I was curious to see what other listers have planned for their Spring projects on their C&Cs. So far, planned for the Enterprise: a.. Relocate engine gauges and move engine-starting switches. b.. change transmission/throttle controls at helm c.. New coat of Petit Vivid d.. Add another coat or two of boot stripes e.. New interior cushions f.. Add cockpit lighting g.. (Maybe) Bolt centerboard inside keel and cover up the "slot" h.. Install bimini i.. Redo the remaining floorboards j.. Store spinnaker pole k.. Install Tactick wind vane and repeater l.. Service the refrigerator. m.. Install two solar vents All the best, Edd Edd M. Schillay Starship Enterprise C&C 37+ | Sail No: NCC-1701-B City Island, NY Starship Enterprise's Captain's Log _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com -- Joel 301 541 8551 ------------------------------------------------------------------------------ _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
