I have a little separation on one piece of the sole. I am going to try to
gently open up the separations, inject some glue or epoxy and clamp it tight
John Enterprise
On Saturday, December 13, 2014 1:51 PM, Daniel Sheer via CnC-List
<cnc-list@cnc-list.com> wrote:
Speakin' of which. Pegathy's cabin sole is original, I think, glass enclosed
ply with holly/teak veneer and varnish. The veneer is separating from the ply,
but the ply is in good shape, I think. I was thinking about using some kind of
artificial teak/holly "stuff" and gluing it on top of the ply, after removing
any loose veneer. Any suggestions as to if this is a good idea? And, if it is,
what kind of "stuff" should I use. I'm hoping to do it over the winter.
Dan SheerPegathy C&C LF38Rock Creek off the Patapsco
_______________________________________________
This List is provided by the C&C Photo Album
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go bottom of page
at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
_______________________________________________
This List is provided by the C&C Photo Album
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go bottom of page
at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
