I may very well be this Peter, 
http://www.mcmaster.com/#8605k44/=vj9rjl
if you have the same Ports that I removed.
I have a roll of this material in 3/8" but I checked my old ports and it
seems to be 1/2"
Of course you don't want a hundred feet, so you might want to see if South
Shore has some, they are closer to you anyways.

Regards,

Bill 

-----Original Message-----
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Peter via
CnC-List
Sent: Sunday, January 18, 2015 8:48 PM
To: cnc-list@cnc-list.com
Subject: Stus-List Port light Gaskets Material

My boat has spent the last few off-seasons on the hard in Mexico. Last time
I was there one of the kids knocked one of the windows and it feel off. I
realized that all of the ports were in similar shape. The gaskets had
basically turned to dust in the Mexican heat.

I am up in Canada now but heading back down to the boat in a couple of
weeks. I boarded up one of the windows and brought the plastic window with
me to get it replaced. I measured the others.

Before I left the boat I read about replacing the gaskets. In the post
someone had linked to a supplier that produces the material for the gaskets
for the port lights, but I can't seem to find it now.  If anyone could point
me in the right direction it would be greatly appreciated.


Kind Regards,
Peter White
S/V Outrider
C&C 39




_______________________________________________
This List is provided by the C&C Photo Album.

Please donate to the C&C Photo Album to keep this list free for all
subscribers.

Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go bottom of
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com


_______________________________________________
This List is provided by the C&C Photo Album.

Please donate to the C&C Photo Album to keep this list free for all subscribers.

Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go bottom of page 
at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com

Reply via email to