MD Products EPDM gaskets have lasted more than 12 years on either of my boats. At Lowes it is something like $16 for a big roll - at least 25 feet.
The spline that house on the outside of the lens and holds it into the frame is available from any glass shop that repairs aluminum storm doors. The spline is about 50 cents a foot, Rick brass Sent from my iPad > On Jan 19, 2015, at 11:26, Dennis C. via CnC-List <cnc-list@cnc-list.com> > wrote: > > Walmart, Lowes and Home Depot all have the "D" shape EPDM gasket material in > their weatherstripping area. I think the brands are either Frost King or MD > Products (#01025). > > Here's the Walmart link: > > http://www.walmart.com/ip/Md-Products-01025-23-64-inch-X-17-inch-Black-Marine-and-Automotive-EPDM/19869641 > > I use it on Touche's old aluminum frame ports. It works. > > Dennis C. > Touche' 35-1 #83 > Mandeville, LA > >> On Mon, Jan 19, 2015 at 8:43 AM, Bill Coleman via CnC-List >> <cnc-list@cnc-list.com> wrote: >> I may very well be this Peter, >> http://www.mcmaster.com/#8605k44/=vj9rjl >> if you have the same Ports that I removed. >> I have a roll of this material in 3/8" but I checked my old ports and it >> seems to be 1/2" >> Of course you don't want a hundred feet, so you might want to see if South >> Shore has some, they are closer to you anyways. >> >> Regards, >> >> Bill >> >> -----Original Message----- >> From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Peter via >> CnC-List >> Sent: Sunday, January 18, 2015 8:48 PM >> To: cnc-list@cnc-list.com >> Subject: Stus-List Port light Gaskets Material >> >> My boat has spent the last few off-seasons on the hard in Mexico. Last time >> I was there one of the kids knocked one of the windows and it feel off. I >> realized that all of the ports were in similar shape. The gaskets had >> basically turned to dust in the Mexican heat. >> >> I am up in Canada now but heading back down to the boat in a couple of >> weeks. I boarded up one of the windows and brought the plastic window with >> me to get it replaced. I measured the others. >> >> Before I left the boat I read about replacing the gaskets. In the post >> someone had linked to a supplier that produces the material for the gaskets >> for the port lights, but I can't seem to find it now. If anyone could point >> me in the right direction it would be greatly appreciated. >> >> >> Kind Regards, >> Peter White >> S/V Outrider >> C&C 39 >> >> >> >> >> _______________________________________________ >> This List is provided by the C&C Photo Album. >> >> Please donate to the C&C Photo Album to keep this list free for all >> subscribers. >> >> Email address: >> CnC-List@cnc-list.com >> To change your list preferences, including unsubscribing -- go bottom of >> page at: >> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >> >> >> _______________________________________________ >> This List is provided by the C&C Photo Album. >> >> Please donate to the C&C Photo Album to keep this list free for all >> subscribers. >> >> Email address: >> CnC-List@cnc-list.com >> To change your list preferences, including unsubscribing -- go bottom of >> page at: >> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > _______________________________________________ > This List is provided by the C&C Photo Album. > > Please donate to the C&C Photo Album to keep this list free for all > subscribers. > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go bottom of page > at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >
_______________________________________________ This List is provided by the C&C Photo Album. Please donate to the C&C Photo Album to keep this list free for all subscribers. Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
