Mike For antifouling properties do you find CSC as good as Amercoat #4? It is the fouling that occurs on Micron CSC that I am trying to get away from
Mike From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of mike amirault via CnC-List Sent: Tuesday, March 10, 2015 10:40 AM To: cnc-list@cnc-list.com Subject: Re: Stus-List bottom paint I am in the same marina as Dwight Veniot and I did use Amercoat #4 for several years. As an antifouling agent it works very well but I found it to be too ablative for my boat which sails about 1000nm per season. After a power wash in the fall, the hull would be nearly bare. Since that time, I have switched to micron CSC which holds up much better and sometimes just needs a "brokers" touch up rather than a full coat each year. Therefore, I think any cost savings you will get with the Amercoat are offset by just going with CSC.
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
