Mike, Boulter Plywood, Somerville, MA (best price)
Atlantic Plywood, Rumford, RI Jamestown Distributors, Bristol, RI I have three sheets of 3/4" on back order for the same project on MIRAGE. I am hearing anywhere from 10 days to over a month. All distributors are having trouble getting it. There is also the composite laminate option...which I don't like, but...a whole lot more affordable and available. We have a Farr 395 here doing composite if you want a few photos. Harry Hallgring hhallgr...@icloud.com On Apr 14, 2015, at 12:30 PM, "Hoyt, Mike via CnC-List" <cnc-list@cnc-list.com> wrote: We are looking to replace the cabin sole in our Frers 33 this season. It is comprised of horizontal floors and covered by 3/4 inch teak and holly. This is very likely the same as many C&Cs. To date I can source 1/2 inch Teak and Holly locally but there is no stock and no known reorder date for 3/4 inch. The two sources in Halifax are East Coast Specialty Hardwood who have 1/4 and 1/2 inch in stock and are out of stock on 3/4 and Halifax Specialty Hardwoods who only stock 1/4 and 1/2 inch. This leaves me to try one of three options: 1- Source out of town 3/4 T&H and pay for the shipping of a 78 lb piece of 4x8 plywood. 2- Use 1/2 inch in place of 3/4 3- Laminate 1/4 inch on top of 1/2 inch marine plywood. And the always available 4th option. Procrastinate and do this next year Does anyone have any thoughts on this or know of other suppliers near Halifax? Regards Mike Hoyt 1987 Frers 33 Persistence Halifax, NS _______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
