That would be "tung oil" unless you licked your floor a lot. Jim Watts Paradigm Shift C&C 35 Mk III Victoria, BC
On 14 April 2015 at 10:05, Burt Stratton via CnC-List <cnc-list@cnc-list.com > wrote: > The sole in our 74' C&C 33 is solid teak (~three quarter thick by ~2 inch > wide) floorboards. No Holly, just spaces between the teak and cross-members > below all morticed to keep the overall thickness consistent. It is original > to the boat. Looked like hell when we bought her. 2-part teak cleaner and a > lot of coats of tongue oil (yes tongue oil) and they still look like new > after a season of hard use. Very sturdy and durable design but not as > aesthetically pleasing as T&H. Would probably be relatively easy to > fabricate. Makes it easy to see what you have in the bilge, too. > > -----Original Message----- > From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Hoyt, > Mike via CnC-List > Sent: Tuesday, April 14, 2015 12:30 PM > To: Bradley Lumgair; cnc-list@cnc-list.com > Subject: Stus-List cabin sole > > We are looking to replace the cabin sole in our Frers 33 this season. It > is > comprised of horizontal floors and covered by 3/4 inch teak and holly. > This > is very likely the same as many C&Cs. > > To date I can source 1/2 inch Teak and Holly locally but there is no stock > and no known reorder date for 3/4 inch. The two sources in Halifax are > East > Coast Specialty Hardwood who have 1/4 and 1/2 inch in stock and are out of > stock on 3/4 and Halifax Specialty Hardwoods who only stock 1/4 and 1/2 > inch. > > This leaves me to try one of three options: > > 1- Source out of town 3/4 T&H and pay for the shipping of a 78 lb piece of > 4x8 plywood. > > 2- Use 1/2 inch in place of 3/4 > > 3- Laminate 1/4 inch on top of 1/2 inch marine plywood. > > And the always available 4th option. Procrastinate and do this next year > > Does anyone have any thoughts on this or know of other suppliers near > Halifax? > > Regards > > Mike Hoyt > 1987 Frers 33 > Persistence > Halifax, NS > > > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the > bottom > of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > >
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
