Thanks Rick. That would be wonderful. Yes I have a 38 mk2 hull #34 so I would think it would be the same as yours. The mods you did also sound great. I like what you use the lockers for too:)
Thanks, Joe Sent from my iPad > On Apr 19, 2015, at 8:56 AM, Rick Brass <rickbr...@earthlink.net> wrote: > > You didn't indicate what model of 38 you have, but if it is a 38 mk2 I would > be glad to take photos and make a dimensioned sketch for you. > > I've made a couple of modifications from the original arrangement. I found > the height of the table to be a bit lower than that of a normal table in > your home; which made access to the bilge difficult and made the fold down > leaf on the starboard side a bit of an "ankle knocker" when going forward. > So I raised the mounting on the mast a few inches and bought a longer metal > leg to support the aft end of the table. > > The port side of the table top originally was fixed, which made getting into > the port settee difficult. I modified the table top so the port side is now > a fold down leaf, similar to the starboard side. Big improvement. > > But the key feature of the table is the two storage wells in the middle of > the table top. That is now my liquor locker. > > > Rick Brass > Imzadi > C&C 38 mk2 Hull #047 > Washington, NC > > > > -----Original Message----- > From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Joseph > Scott via CnC-List > Sent: Saturday, April 18, 2015 11:17 PM > To: CnClist > Subject: Stus-List 38 Salon Table > > Hello All > > When we bought our 38 it didn't have the salon table. Any ideas where I > could get a replacement or plans to make one? > > Thanks > > Joe > > Sent from my iPad > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the bottom > of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > _______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com