I have the same Gardenia 4 way manifold with the same labels on my 89 30-2. Must have come from the factory that way?
On Thu, May 28, 2015 at 7:28 AM Mitchell's via CnC-List < cnc-list@cnc-list.com> wrote: > Josh, The valve on our 37+ was made by Gardenia and its a 4-1 if that > helps. (I converted the port side fresh water tank to a holding tank for > the Great Lakes, we have lots of room with two holding tanks.) > Tom, it hasn't been said yet, and you probably already know but there is a > Quest compression fitting end that goes on the plastic pipe with a SS ring > and you can tighten the nut down pretty tight! The nut squeaks all the way > tight and will take quite a bit of abuse. The plumbing is not in the > sunlight and will last decades. If I was going to change it up and had a > pile of spare cash to burn, I would go Pex too. They can use a two wrench > snug but not very often. RVs have been using it forever too. > Len > Crazy Legs > 1989 37+ > > > > Sent from my mobile device._______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > >
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com