Thanks Len and Kevin, I looked at their website and it looks like they redesigned the 4 to 1 manifold a little. It also looks like the fittings are still garden hose fittings. Maybe the Gilmore I have just needs to have adapters.
Josh On May 28, 2015 10:28 AM, "Mitchell's via CnC-List" <cnc-list@cnc-list.com> wrote: > Josh, The valve on our 37+ was made by Gardenia and its a 4-1 if that > helps. (I converted the port side fresh water tank to a holding tank for > the Great Lakes, we have lots of room with two holding tanks.) > Tom, it hasn't been said yet, and you probably already know but there is a > Quest compression fitting end that goes on the plastic pipe with a SS ring > and you can tighten the nut down pretty tight! The nut squeaks all the way > tight and will take quite a bit of abuse. The plumbing is not in the > sunlight and will last decades. If I was going to change it up and had a > pile of spare cash to burn, I would go Pex too. They can use a two wrench > snug but not very often. RVs have been using it forever too. > Len > Crazy Legs > 1989 37+ > > > > > Sent from my mobile device. > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > >
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
