It appears that the zincs got replaced on my drive shaft but not my Maxprop!!! Needless to say my prop is shot and I am looking at either another of the same or other options. I am hoping that some one out there with the same or similar boat can weigh in on whether the Maxprop or something else is recommended. I have a 3GM30 and ever since I bought this boat several years ago I have felt there was a bit too much vibration and not enough speed. If I take the engine up to about 2700 rpm’s my boat speed is only around 5 to 5 1/4 knots. The prop has always performed adequately but not great. Maybe the pitch etc. is off. Looking also at the Variprop which supposedly has the least drag of all 3 blades and can be adjusted much easier than the Maxprop. Thoughts, ideas, what are you other 34+ owners using?
Thanks, Dave M.
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
