Some older ones might be better. You don't need much range or bandwidth on the boat, so you might find 11g to be more energy efficient. Unless the AP is using sophisticated power management and gears down to maintain the lowest required level of signal (some of the better 11ac). Regardless, you want one where the transmit power can be adjusted to conserve the energy. That wrt54gl can be loaded with an open firmware, which offers plenty of options. It uses about 5-6 W (~0.5 A); an interesting feature is that it can easily run on from 5 V to (supposedly) 40 V DC. This means that it can easily run off the batteries, even if the voltage fluctuates.
Marek From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Graham Collins via CnC-List Sent: October-28-15 22:05 To: cnc-list@cnc-list.com Cc: Graham Collins Subject: Re: Stus-List Signal K interface Never even looked at it, but that makes sense. I'll have to see what router is most energy efficient. Graham Collins Secret Plans C&C 35-III #11 On 2015-10-28 5:48 PM, Kevin Driscoll via CnC-List wrote: Most wifi routers are 12v. Just cut off the 110v power brick. Did this on our router/boat. Works the same. On Wed, Oct 28, 2015 at 1:39 PM Graham Collins via CnC-List <cnc-list@cnc-list.com> wrote: You didn't get in early enough, I got in line for $179. :-) Now I need a 12v WiFi router. Graham Collins Secret Plans C&C 35-III #11 On 2015-10-28 10:17 AM, Joel Aronson via CnC-List wrote: Just spent $200 on a flyer: https://www.kickstarter.com/projects/1689846268/ikommunicate-gateway-enablin g-the-internet-of-thin If it works it will convert NMEA to an open source. -- Joel 301 541 8551 _______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com _______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com _______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com