Is the head hatch on the 70s Viking 33/34 the same? The Nicro 3" cap gives some sense of scale in the picture:
Viking 34 Head Hatch Don V34 NCYC > On Dec 6, 2015, at 6:17 PM, s/v Johanna Rose via CnC-List > <cnc-list@cnc-list.com> wrote: > > Fred, > > All of my hinges have one hole. The break occurred between the hole and the > hinge joint. I have posted additional photos on my blog but no write up yet. > > I checked Wally’s site(our hulls are two numbers off), and it looks like his > hinges are like mine with one big hole through the acrylic for each hinge. > The latch on the other hand has two holes. > > Maybe around 1981, they changed the hinge? > > > Here is the direct link to Wally’s page: > http://www.wbryant.com/StellaBoat/Projects/deck/hatch/index.htm > > > Thanks again for you input. > > - > Paul E. > 1981 C&C 38 Landfall > S/V Johanna Rose > Carrabelle, FL > > http://svjohannarose.blogspot.com/ > >> On Dec 6, 2015, at 2:11 PM, cnc-list-requ...@cnc-list.com wrote: >> >> Date: Sun, 6 Dec 2015 13:07:50 -0600 >> From: Frederick G Street <f...@postaudio.net> >> To: cnc-list@cnc-list.com >> Cc: PME <dre...@gmail.com> >> Subject: Re: Stus-List little A&H hatches on a LF38 >> Message-ID: <5296fd50-e2c9-41f5-bd42-89088414f...@postaudio.net> >> Content-Type: text/plain; charset="utf-8" >> >> Paul ? that looks pretty nasty; and those lenses don?t look like they?re >> original to me. The hinges have two holes for bolts; it looks like the one >> on the left of your photo cracked across those two holes. I have no clue >> where the other one came from, with one large bolt through it, unless it was >> drilled out from its original state. >> >> If you can get the hinge pin out, I?d be willing to bet you could use the >> one intact hinge from this hatch to have some new one machined out of >> aluminum, with the original hole pattern for the lens bolts. If you decide >> to go that route, let me know and I can have some lenses made up for you. >> >> I doubt you?re going to find a replacement hatch anywhere that will fit >> those dimensions without having to do a LOT of glass work; the pads in which >> they sit don?t match any after-market hatches I?ve ever been able to find, >> or I would have replaced mine long ago. >> >> ? Fred >> >> Fred Street -- Minneapolis >> S/V Oceanis (1979 C&C Landfall 38) -- on the hard in Bayfield, WI :^( > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the bottom > of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com