I do the same as Neil. :)
Cheers, Russ
Sweet 35 mk-1
At 01:19 PM 20/12/2015, you wrote:
I do the same as you Dennis.
Josh Muckley
S/V Sea Hawk
1989 C&C 37+
Solomons, MD
On Dec 20, 2015 3:04 PM, "Dennis C. via
CnC-List" <<mailto:cnc-list@cnc-list.com>cnc-list@cnc-list.com> wrote:
Just curious what listers use for a draft offset and why.
I use the actual offset as measured from the
transducer to the bottom of the keel so the
depth shown closely matches the charted
depth. I prefer to compare the depth shown on
my instruments to the chart plotter rather than
have to do the math all the time.Â
I know some owners use an offset so that the
instrument shows depth under keel while others don't use any offset at all.
Dennis C.
Touche' 35-1 #83
Mandeville, LA
_______________________________________________
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
