Bill, yes it is. Please could you check out how you would like to ship? It will be coming from CT or RI depending on when in the next couple of weeks. There are Cotter pins and I think a shaft nut, but no shaft key. It was making a nice paper weight in my office, but since I won't have an office in two weeks time...
Thanks, Tim > On Feb 6, 2016, at 5:50 PM, Bill Blight via CnC-List <cnc-list@cnc-list.com> > wrote: > > Hi Tim > I am interested in the Mated offered in your e mail. I currently have a > Martec 18 x 10 which is too large of a diameter of a 3GMF engine. Can you > please let me know if this prop is still available. > > Thanks, > Bill > CC 35 MkIII > > From: Tim Goodyear via CnC-List > Sent: Thursday, February 04, 2016 10:12 AM > To: cnc-list@cnc-list.com > Cc: Tim Goodyear > Subject: Re: Stus-List Propeller Question for 35-3 > > Sam, > > I have a 2-blade Martec Elliptic 17x10 RH folding prop for a 1" shaft that > you are welcome to try out for the cost of shipping (from New England). It > came off my 35-3 with Yanmar 3GMF and 2.2:1 transmission. > > Fair warning, I replaced it with a flex-o-fold because I wasn't happy with > performance in reverse and occasional unbalanced opening (one blade more than > another) at low revs... > > Tim > (ex Mojito; C&C 35-3 Newport, RI) > >> On Wed, Feb 3, 2016 at 11:42 PM, Jim Watts via CnC-List >> <cnc-list@cnc-list.com> wrote: >> I have a spare prop I took off when I replaced it with a Max Prop, 17 X 10 >> RH. We can talk. >> https://lh3.googleusercontent.com/-LKRe8QHE_x8/VrLWbGMeEWI/AAAAAAAAEKU/Zl7I9s_8bVw/s912-Ic42/IMG_7534.JPG >> >> >> >> Jim Watts >> Paradigm Shift >> C&C 35 Mk III >> Victoria, BC >> >>> On 3 February 2016 at 16:35, Jake Brodersen via CnC-List >>> <cnc-list@cnc-list.com> wrote: >>> Sam, >>> >>> >>> >>> IIRC, I’m swinging a 10x16 Martec elliptical prop. Good forward >>> performance. Reverse requires a lot of rpms to get a response, but it >>> works for me. >>> >>> I’m just a high speed – low drag racer anyway. >>> >>> >>> >>> Jake >>> >>> >>> >>> Jake Brodersen >>> >>> C&C 35 Mk-III “Midnight Mistress” >>> >>> Hampton VA >>> >>> >>> >>> >>> >>> >>> >>> From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Sam >>> Wheeler via CnC-List >>> Sent: Wednesday, February 3, 2016 17:08 >>> To: cnc-list@cnc-list.com >>> Cc: Sam Wheeler <samwheeler.s...@gmail.com> >>> Subject: Stus-List Propeller Question for 35-3 >>> >>> >>> >>> Hi everyone, >>> >>> >>> >>> I recently bought a 35-3, and one of the projects it came with was the prop >>> had galvanic corrosion and needed to be replaced. It's a fixed two blade. >>> >>> >>> >>> The previous owners adjusted the pitch on it, apparently from 10 to 8. >>> They seemed to think that improved performance but the boatyard is telling >>> me that the specs for the boat and engine call for 10. Does anyone have >>> any thoughts on this? >>> >>> >>> >>> Thanks, >>> >>> Sam >>> >>> >>> >>> >>> >>> ---------- Forwarded message ---------- >>> From: Carston Grasvik <cars...@svendsens.com> >>> Date: Wed, Feb 3, 2016 at 8:19 AM >>> Subject: FW: Propeller for C&C 35 >>> To: Sam Wheeler <samwheeler.s...@gmail.com> >>> >>> >>> Hi Sam, >>> >>> >>> >>> It appears your old prop has an odd pitch to it. The prop I estimated for >>> you has a 10 degree pitch which is specified for your boat and engine. >>> Please see note below from our prop people and advise what you’d like to do. >>> >>> >>> >>> Best Regards, >>> >>> >>> >>> Carston >>> >>> >>> >>> From: Ernel Elkin [mailto:prop...@pacbell.net] >>> Sent: Monday, February 01, 2016 3:47 PM >>> To: Carston Grasvik >>> Subject: Propeller for C&C 35 >>> >>> >>> >>> HI CARSTON - DAVE MEASURED THE PITCH ON THE 2 BLADE AND IT IS 8"! >>> UNFORTUNATELY, THE PROP I FOUND FOR YOU HAD ALREADY BEEN REPITCHED FROM 12 >>> TO 10 AND CAN NOT BE REPITCHED ANYMORE. IT WOULD PROBABLY CRACK. >>> >>> >>> >>> I LOOKED AROUND AND FOUND ANOTHER 18"X 10", BUT THE PILOT BORE IS 1-1/8", >>> SO THE CUSTOMER WOULD HAVE TO USE A BUSHING WITH IT AND HAVE IT REPITCHED >>> TO 8". BUSHING COST IS $74 AND REPITCHING IS $150. >>> >>> >>> >>> KIND OF A WEIRD SIZE. THE LOWEST PITCH AVAILABLE IS 10". PLEASE DISCUSS >>> WITH YOUR CUSTOMER. THANKS. >>> >>> >>> >>> ERNEL >>> >>> >>> >>> >>> _______________________________________________ >>> >>> Email address: >>> CnC-List@cnc-list.com >>> To change your list preferences, including unsubscribing -- go to the >>> bottom of page at: >>> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >> >> >> >> _______________________________________________ >> >> Email address: >> CnC-List@cnc-list.com >> To change your list preferences, including unsubscribing -- go to the bottom >> of page at: >> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the bottom > of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the bottom > of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com