Thanks for the displacement data Michael. I have HIN 30007972 - hull #7 laid up in September 1972 if I'm decoding correctly.
She has tiller steering and the Atomic-4 gasoline engine, rigged for spinnaker (pole chocked on deck) and roller-furling boom. Two batteries, two sets of primary winches, two danforth anchors with chain / rope rode, fairly extensive sail inventory. Everything else is basic and standard, or very lightweight optional stuff. For racing I can remove an anchor and many of the sails, and sail with empty tanks, etc. I'll report back to the list after I've calculated her weight from truck scale differences between loaded & unloaded trailer. Cheers, Randy Stafford S/V Grenadine C&C 30 MK1 #7 Ken Caryl, CO ----- Original Message ----- From: "Michael Brown via CnC-List" <cnc-list@cnc-list.com> To: cnc-list@cnc-list.com Cc: "Michael Brown" <m...@tkg.ca> Sent: Thursday, February 11, 2016 10:38:37 AM Subject: Re: Stus-List Early 30-1 Interior Doors I have a C&C 30 "77" model year. >From my HIN ZCC304531076 I would guess it is #453 laid up October 1976. ... At haulout, so no mast and most stuff removed the crane weighs me at 8500 - 8800 lbs. Some of the C&C specs claimed 7,900 lbs which may have been possible stripped out, one battery and tiller steering. I think in race trim carrying stuff like flares, anchor and rode, #1 - #3 - spinnakers, spin and whisker pole .... I would guess 10,000 lbs is reasonable. ... Michael Brown Windburn C&C 30-1 C&C Sailors- I noticed the owner of C&C 30 MK1 hull #1, Rick Bushie, is on this list. It's awesome that boat is still sailing, and that her owner is in this community. ... <blockquote> Also, Rick, what is the displacement of your boat? Sailboat data.com and the brochures show 8000 pounds. But the previous owner of hull #7 thinks it's higher, like 10,000 pounds. I'll measure her precise displacement by differencing truck scale weights of loaded and unloaded trailer after I launch her this spring, but just wanted to check with you. Cheers, Randy Stafford S/V Grenadine C&C 30 MK1 #7 Ken Caryl, CO </blockquote> _______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
