In my window replacement project I've removed the old windows, most of the old adhesive, done a fair degree of damage to the gel coat and created one small chip in the surrounding fiberglass. There is a layer of old adhesive (brown) between the two windows (and a section where the adhesive came off with the old windows) which will be covered by the new plexiglass.
Does anyone have a recommendation as to whether I should remove (sand/chisel) the adhesive that remains between the wndows or just bring everything else up to that level when doing the gel coat and fiberglass repairs? Dave Saltaire C&C 35 Mk3 Bristol, RI ----- Original Message ----- From: "Gary Russell via CnC-List" <cnc-list@cnc-list.com> To: "C&C List" <cnc-list@cnc-list.com> Cc: "Gary Russell" <captnga...@gmail.com> Sent: Tuesday, March 1, 2016 7:05:20 AM Subject: Re: Stus-List 3M tape Doug and Fred, I used the 1/2" x 0.090" also. Worked great and easy to use. Gary ~~~~~~~ _ / ) ~~~~~~ On Mon, Feb 29, 2016 at 9:43 PM, svpegasu...@gmail.com < cnc-list@cnc-list.com > wrote: Pretty sure I used the 1/2 inch by 0.090 thick stuff. Doug Mountjoy svPegasus LF38 just west of Ballard, WA. ------ Original message------ From: Fred Hazzard via CnC-List Date: Mon, Feb 29, 2016 16:36 To: cnc-list@cnc-list.com ; Cc: Fred Hazzard; Subject: Re: Stus-List 3M tape Doug what size did you use? Fred On Feb 29, 2016 4:32 PM, " svpegasu...@gmail.com " < cnc-list@cnc-list.com > wrote: <blockquote> I got a roll thru Amazon. Doug Mountjoy svPegasus LF38 just west of Ballard, WA. ------ Original message------ From: Fred Hazzard via CnC-List Date: Mon, Feb 29, 2016 12:43 To: cnc-list@cnc-list.com ; Cc: Fred Hazzard; Subject: Stus-List 3M tape I am looking for a source of the 3M tape vhb4991 to redo some windows. Secondly I would like some ideas on removing the old windows I did 7 years ago with sikkens 295. Along with removing the windows I will need to clean up the sikkens from the fiberglas to accept the 3M tape. Thanks Fred Hazzard S/V Fury C&C 44 Portland, Or _______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com _______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com </blockquote> _______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com