Ryan,

Based on the photos, I would. 

Even if it looked good, unless you know it's a multi-season paint, the 
anti-fouling properties may be gone. 

Do you know what's on there? Do you know what paint can go over it? 


All the best,

Edd

-------------------------------
Edd M. Schillay
Starship Enterprise
NCC-1701-B
C&C 37+ | City Island, NY
www.StarshipSailing.com
-------------------------------
914.332.4400  | Office
914.774.9767  | Mobile
-------------------------------
Sent via iPhone 6
iPhone. iTypos. iApologize

On Mar 1, 2016, at 9:19 PM, Ryan Doyle via CnC-List <cnc-list@cnc-list.com> 
wrote:

Hey all,

Just wanted to get your opinions on whether it's necessary to do a bottom paint 
job on my boat before launch this year.  I just bought the boat in October, so 
I'm not sure the last time it was done.  I'd rather spend the money on some 
other things this season, but if it's a must, I'll do it.

Any thoughts are appreciated.  

Photos at the links below:

https://drive.google.com/file/d/0B8g8d5sXYVWGdDZLWU1QZF9yWHYyTDRTbTYxbXczOHJCWjdv/view?usp=sharing

https://drive.google.com/file/d/0B8g8d5sXYVWGbmgxUTMyMHl3SjhsWHdjMDhxN19vQUkwTy1r/view?usp=sharing

https://drive.google.com/file/d/0B8g8d5sXYVWGQkRROWJPcnZmNThSY1Y3Q1hzM2RnNGp2TkNz/view?usp=sharing

https://drive.google.com/file/d/0B8g8d5sXYVWGaGh4eDhESi1LVU5VWXZrUzluU2Z0YThDMU1n/view?usp=sharing

https://drive.google.com/file/d/0B8g8d5sXYVWGd2R3RmpOMGNfdjhtTlJhRGhwZGQ2Q3lDWnVZ/view?usp=sharing

https://drive.google.com/file/d/0B8g8d5sXYVWGUl9XNzVZSlR2THV4S2gxNXhoWnhsWFIyRGNZ/view?usp=sharing


Thanks,
Ryan

_______________________________________________

Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of 
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com

_______________________________________________

Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of 
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com

Reply via email to