You may want to buy a quart of whatever bottom paint is there and a foam brush - just smooth the rough edges out and cover them. It appears to be something thick...??..
Gary -----Original Message----- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Ryan Doyle via CnC-List Sent: Wednesday, March 2, 2016 9:48 AM To: cnc-list@cnc-list.com Cc: Ryan Doyle <ryanpdo...@gmail.com> Subject: Re: Stus-List Do I need a new coat of bottom paint? Thanks everyone for the responses. I am a diver, so I'm more than happy to take a dive under the boat mid-summer to check things out and do some cleaning if needed. I'm probably going to leave it as is for now and buy a much-needed new depth finder. Francois - good call on touching up with "leftovers" if I can trade a few beers or whatever for them. As someone else pointed out though, I should find out what type is on there before I paint at all. I'll contact the previous owner and figure out what it is. Now I have some questions about depth finders. I'll start a new thread. Thanks again guys. Very helpful as usual. _______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com _______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
