Having used Poliglow for a number of years, I would support using it. The major task is to get all the old stuff off the boat, wax, dirt, etc. The PoliPrep should be used to make sure the surface is not full of blemishes or oxidation. It should be an even, dull finish if it had been badly oxidized. Then the coats (generally six to eight - they go on as fast as you can walk around the boat - and they look crappy for the first three or four, then start to shine) will make it look better.
Gary -----Original Message----- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of ahycrace--- via CnC-List Sent: Wednesday, May 18, 2016 5:24 PM To: cnc-list@cnc-list.com Cc: ahycr...@cox.net Subject: Re: Stus-List Removing Polyglow So bottom line is poly Glow good or not so much? Friend of mine has a badly chalked Santana and received for free an almost full kit of Polyglow he asked me if it was worth using. Gary Kolc ---- Joseph Bognar via CnC-List <cnc-list@cnc-list.com> wrote: > I found that if your fenders rub the hull in the same spot . It will wear the Polyglow off. > > Sent from Joe Bognar > > > > _______________________________________________ This list is supported by the generous donations of our members. If you like what we do, please help us pay for our costs by donating. All Contributions are greatly appreciated! _______________________________________________ This list is supported by the generous donations of our members. If you like what we do, please help us pay for our costs by donating. All Contributions are greatly appreciated!
