On Thu, Jul 7, 2016 at 10:55 AM, Josh Muckley via CnC-List < cnc-list@cnc-list.com> wrote:
> The nice thing about the Stainless Lobster controller is that it has a > boost mode so normally it will run low and slow and almost continuously. > You can also program it to maintain a slight higher temperature in normal > mode. All of this causes a lower overall A-Hr draw from the battery. When > a charging source becomes available the controller will go into "boost" > mode where it runs at full speed and a lower temperature band. This > pre-cools to a lower temperature and saves a few A-Hrs when back on battery. That's the way the Isotherm ASU systems work. They sense increased voltage from shore power or engine running and boost the compressor to really freeze the cold plate. Dennis C.
_______________________________________________ This list is supported by the generous donations of our members. If you like what we do, please help us pay for our costs by donating. All Contributions are greatly appreciated!
