Mike,
The concern is not the size of the boat vs. the size of the prop, but
the clearance between the blade tips and the hull. If the blade tip gets
to within 15% of the blade radius there is the potential for vibration.
The 15% is from memory and my not be exactly correct. Perhaps others can
confirm my numbers.
Gary
S/V Kaylarah
~~~~~~~_/)~~~~~~
On Thu, Oct 27, 2016 at 10:07 AM, Dave S via CnC-List <cnc-list@cnc-list.com
> wrote:
> sorry Mike - the "Mikey" was a typo... lol.
>
> On 27 October 2016 at 10:06, Dave S <syerd...@gmail.com> wrote:
>
>>
>> +1 on Mikey Hoyt's point..
>>
>> Windstar is an '85 33-2. same gen, very similar design to 35-3, and
>> only a little smaller.
>>
>>
>>
>
> _______________________________________________
>
> This list is supported by the generous donations of our members. If you
> wish to make a contribution to offset our costs, please go to:
> https://www.paypal.me/stumurray
>
> All Contributions are greatly appreciated!
>
>
_______________________________________________
This list is supported by the generous donations of our members. If you wish to
make a contribution to offset our costs, please go to:
https://www.paypal.me/stumurray
All Contributions are greatly appreciated!
