Yes, that pin is to hold down the plate covering the bedding compound. Bruce
Please forgive any typos as this was sent from my iPhone. > On Jan 31, 2017, at 8:42 PM, Lee Youngblood via CnC-List > <cnc-list@cnc-list.com> wrote: > > They are likely there to hold down the bedding plate. Sometimes you have > screws and pins which can be lifted up for rebedding around the chainplates. > > >> On Jan 31, 2017, at 5:36 12PM, RANDY via CnC-List <cnc-list@cnc-list.com> >> wrote: >> >> Does anybody know what the heck these pins in C&C chainplates are for? >> >> https://drive.google.com/open?id=0B-NqAxQ6JxFTa2dfMFlmWHlsR0U >> >> Cheers, >> Randy >> _______________________________________________ >> >> This list is supported by the generous donations of our members. If you wish >> to make a contribution to offset our costs, please go to: >> https://www.paypal.me/stumurray >> >> All Contributions are greatly appreciated! > > _______________________________________________ > > This list is supported by the generous donations of our members. If you wish > to make a contribution to offset our costs, please go to: > https://www.paypal.me/stumurray > > All Contributions are greatly appreciated!
_______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!