I would bet CNC put it in Oilwell, right in front of the keel. It may be off to
the side a bit. Mine was underneath the V Berth on cernterline.
Regards,
Bill Coleman C&C 39
-------- Original message --------
From: Peter via CnC-List <cnc-list@cnc-list.com>
Date: 3/27/17 20:30 (GMT-05:00)
To: cnc-list@cnc-list.com
Cc: schu...@gmail.com
Subject: Stus-List Signet Depth Sounder Location on a C&C Landfall 38
I just hauled my boat out and had the bottom painted. I asked the person
providing the service to make sure that the Transducer was clear of paint and
also if they could tell me the location. The painter could not locate the
transducer. For the life of me I have not been able to find out where the
transducer is located. It is a Signet brand depth sounder and it came that way
installed by the factory (I assume). Maybe its not a through the hull
transducer I don’t know. If anyone has a similar set up or knows the location
please let me email me. The depth sounder works intermittently and I would
like to find out why. I have not followed the wiring (grey) because there are
a number of grey wires bundled together and tied with plastic ties. I may have
to do this sooner or later. Thank youPeter Sent from Mail for Windows 10
_______________________________________________
This list is supported by the generous donations of our members. If you wish to
make a contribution to offset our costs, please go to:
https://www.paypal.me/stumurray
All Contributions are greatly appreciated!
