Peter — my depth and speed transducers are under the step up to the V-berth; there’s a trapezoidal panel that lifts off. If you can see the transducer on outside of the hull, you should be able to get an idea of where it is on the inside.
— Fred Fred Street -- Minneapolis S/V Oceanis (1979 C&C Landfall 38) -- on the hard in Bayfield, WI :^( > On Mar 27, 2017, at 7:30 PM, Peter via CnC-List <cnc-list@cnc-list.com> wrote: > > I just hauled my boat out and had the bottom painted. I asked the person > providing the service to make sure that the Transducer was clear of paint and > also if they could tell me the location. The painter could not locate the > transducer. For the life of me I have not been able to find out where the > transducer is located. It is a Signet brand depth sounder and it came that > way installed by the factory (I assume). Maybe its not a through the hull > transducer I don’t know. > > If anyone has a similar set up or knows the location please let me email me. > The depth sounder works intermittently and I would like to find out why. I > have not followed the wiring (grey) because there are a number of grey wires > bundled together and tied with plastic ties. I may have to do this sooner or > later. > > Thank you > Peter
_______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
