And be sure its cast ....... -----Original Message----- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Bruce Whitmore via CnC-List Sent: Tuesday, April 4, 2017 2:01 PM To: cnc-list@cnc-list.com Cc: Bruce Whitmore <bwhitm...@sbcglobal.net> Subject: Re: Stus-List Windows Pt 2.
Remember to use plexiglass, not Lexan. Lexan will scratch and craze. Kindest Regards, Bruce 847.404.5092 Please forgive any typos as this was sent from my iPhone. > On Apr 4, 2017, at 12:39 PM, Eric Baumes via CnC-List <cnc-list@cnc-list.com> > wrote: > > I spoke to a local fabricator about making the windows. > > We spoke for a while about the curvature of the windows and whether they > would have to be thermoformed. > > I know the windows curve to match the curve of the cabin top, but are they at > all curved vertically? > > Researching Lexan is seems you can cold bend it as long as the radius is 10x > the thickness. > > For anyone who has done this on a 34/36 or 37/40, were the replacement > windows flat stock? > > Thanks, > > Eric > S/V Hee Soo > 34/36 > _______________________________________________ > > This list is supported by the generous donations of our members. If you wish > to make a contribution to offset our costs, please go to: > https://www.paypal.me/stumurray > > All Contributions are greatly appreciated! _______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated! _______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
