I've only got short (~2') tracks between the rails and the coamings, with their forward ends at the aft lifeline gate stanchion / forward primary winch. I use them with the cars all the way forward for my #2 genoa (150%), and with the cars all the way aft for my #1 genoa (165%). I use snatch blocks on the rails for smaller headsails. With my #3 genoa (130%) I position the blocks just forward of the forward lifeline gate brace. To use my working jib I'd position the blocks farther forward and would probably wish they were more inboard, but to be honest I hardly ever sail with a headsail smaller than the #3 genoa. This system could probably use some fine tuning, but it was good enough for me last year, and I won races when the wind was up.
Cheers, Randy Stafford S/V Grenadine C&C 30-1 #7 Ken Caryl, CO ----- Original Message ----- From: "Ronald B. Frerker via CnC-List" <cnc-list@cnc-list.com> To: "cnc-list" <cnc-list@cnc-list.com> Cc: "Ronald B. Frerker" <rbfrer...@yahoo.com> Sent: Wednesday, April 5, 2017 11:27:53 AM Subject: Re: Stus-List genoa cars and tracks - C&C 30 MK1 1979 I have the shoal draft model and have found that I'm better off not trying to point too high. As a result, the genoa track between the rail and the coming going up a couple feet forward of the bulkhead works well. However, sheeting to the toe rail works well also. For the smaller jib, I always use the rail. Pointing too high just seems a bad tradeoff with the shoal draft keel. Ron Wild Cheri C&C 30-1 STL From: Steven Tattrie via CnC-List <cnc-list@cnc-list.com> To: cnc-list <cnc-list@cnc-list.com> Cc: Steven Tattrie <steven.tatt...@gmail.com> Sent: Wednesday, April 5, 2017 9:35 AM Subject: Stus-List genoa cars and tracks - C&C 30 MK1 1979 Hi everyone, I am investigating putting genoa tracks and cars on my C&C30 MK1 1979. I have a 110 and 150 head sail. Can folks racing 30's comment on what is the best configuration of tracks on a 30. Will one long track work verses separate tracks for different sails? and where on the deck would they be installed? would the 110 be sheeted inside the shrouds? when they are best used? I have been searching photos on the internet and found at least half a dozen different configurations. So I don't think will be an easy decision on where to locate. you comments will be appreciated Steve _______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
_______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!