Just a caution on using a hole saw. You shouldn't have a problem with a 1 1/4 hole saw but when using a larger one you should use a drill with a side handle. I have a corded 1/2 inch drill with a side handle that I use for all hole saw work. A broken wrist could be painful. :)
Dennis C. On Wed, Apr 5, 2017 at 11:05 AM, Thomas Delaney via CnC-List < cnc-list@cnc-list.com> wrote: > Hi listers, > > Thanks, everyone, for your advice on the solar charging system and ACR. > Onto the next project! > > I'm going to be drilling a hole in the hull to install a > well-above-the-waterline thruhull for a bilge pump discharge hose. The > thruhull is 1 1/8" inch, so I'm going to use a 1 1/4" hole saw drill bit. > I'm going to seal it with 3m 4200. Does this plan make sense? Are there any > surprises to expect? > > Thanks, > Tom > > --- > Snow Goose > C&C 35 Mk I > City Island, NY > > > _______________________________________________ > > This list is supported by the generous donations of our members. If you > wish to make a contribution to offset our costs, please go to: > https://www.paypal.me/stumurray > > All Contributions are greatly appreciated! > >
_______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!