Do yourself a favor. For limited clearance work get one of these: https://www.amazon.com/GearWrench-85035-35-MicroDriver-Set/dp/B0062FSAVI
Dennis C. Touche' 35-1 #83 Mandeville, LA On Mon, Apr 10, 2017 at 4:37 PM, Phygital via CnC-List < cnc-list@cnc-list.com> wrote: > Hi, > > I have a small leak emanating between the sending unit and the top of the > fuel tank on my 83 Landfall 38. > > Space is especially tight on these LF's and I'm wondering if anyone has > had the "pleasure" of changing the sending unit or replacing the gasket > (assuming there is one) on the LF 38, and what's involved. I'm trying to > find some pictures of what the specific LF (likely original) sending unit > looks like but no luck. If you have any or suggestions on replacements it > would much appreciated. > > Space is quite tight and only about 5-6 inches of clearance from the > cockpit sole. > > The boat is on the hard and I'd like to tackle this before launch. > > Thanks a lot, > > /John > > On Apr 10, 2017, at 12:00 PM, cnc-list-requ...@cnc-list.com wrote: > > Send CnC-List mailing list submissions to > cnc-list@cnc-list.com > > To subscribe or unsubscribe via the World Wide Web, visit > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > or, via email, send a message with subject or body 'help' to > cnc-list-requ...@cnc-list.com > > You can reach the person managing the list at > cnc-list-ow...@cnc-list.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of CnC-List digest..." > > Today's Topics: > > 1. RE Gel coat Crazing Below the Waterline (Joseph Scott) > 2. Re: Eye splice in used line (bwhitm...@sbcglobal.net) > 3. Re: AIS and MMSI as well as marine radio use in Canada > (Marek Dziedzic) > 4. Re: Gel coat crazing below waterline (Doug Ellmore) > 5. Re: Gel coat crazing below waterline (Marek Dziedzic) > > <mime-attachment> > > <mime-attachment> > > <mime-attachment> > > <mime-attachment> > > <mime-attachment> > > _______________________________________________ > CnC-List mailing list > CnC-List@cnc-list.com > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > > _______________________________________________ > > This list is supported by the generous donations of our members. If you > wish to make a contribution to offset our costs, please go to: > https://www.paypal.me/stumurray > > All Contributions are greatly appreciated! > >
_______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
