I would get a small grinder (perhaps a Dremel) and carefully grind it off. Gary S/V Kaylarah '90 C&C 37+ East Greenwich, RI, USA
~~~~~~~_/)~~~~~~ On Tue, May 16, 2017 at 12:07 PM, Dr. Mark Bodnar via CnC-List < cnc-list@cnc-list.com> wrote: > > I considered the same thing - if the plexus is well adhered then why not > just leave it there? > > But some of the plexus was not well adhered - some came off fairly easily > with just hand pressure on a chisel. I decided I didn't want to finish the > job to discover that the foundation attachment was weak in spots and in > need of replacement. > > That said I couldn't "pull" my plexus off -- it was rock hard and had to > be chipped away > > > Mark > > CS30 Prosecco > > > There is no cure for birth and death save to enjoy the interval. > - George Santayana > > On 2017-05-16 12:35 PM, Bruce Whitmore via CnC-List wrote: > > Hello all, > > I am looking to your collective wisdom on the fixed port replacement on > our 1994 C&C 37/40+. I am aware of the recommendations regarding VHB and > Dow 795. > > Due to time constraints, I am having a highly recommended pro do the work, > and he removed one of the ports today. He asked a reasonable question, > since the plexiglass peeled off without pulling any of the Plexus off the > gelcoat. When he tried to pull a bit of the Plexus off, as many of you > have commented, it also pulled some of the gelcoat. The Plexus also quite > hard. > > So, if the Plexus is so well adhered, and it will be very stubborn to come > off the gelcoat (and do damage in the process), Should I just leave the > Plexus in place and allow the VHB to attach to it? > > I understand the thickness of the VHB might make the window stand out a > little proud from the fiberglass by comparison, but I'm not sure that's a > bad tradeoff compared to trying to remove something that might serve as a > good substrate anyway. > > Thoughts? > > Your input is greatly appreciated! > > Bruce Whitmore > > (847) 404-5092 (mobile) > bwhitm...@sbcglobal.net > > > _______________________________________________ > > This list is supported by the generous donations of our members. If you wish > to make a contribution to offset our costs, please go to: > https://www.paypal.me/stumurray > > All Contributions are greatly appreciated! > > > > _______________________________________________ > > This list is supported by the generous donations of our members. If you > wish to make a contribution to offset our costs, please go to: > https://www.paypal.me/stumurray > > All Contributions are greatly appreciated! > >
_______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
