Does anyone know off hand the diameter of the rod used on 33-2 upper/lower/intermediates?
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of John McKay via CnC-List Sent: Thursday, May 18, 2017 10:16 AM To: cnc-list@cnc-list.com Cc: John McKay Subject: Re: Stus-List 33-2 shroud tensions Mike The guage will give a recommended tension for the rod diameter. I would started with this. I just started to use the Loos guage last fall so not much experience with the guage really. John on Enterprise Sarnia Ontario On Thursday, May 18, 2017 8:19 AM, "Hoyt, Mike via CnC-List" <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> wrote: Does anybody have numbers for shroud tension on 33-2 using Loos Rt-10? Thanks Mike For Colmonel _______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
_______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
