I use the Loos RT 10 to tension my rig.....our rigs are different so
numbers may be irrelevant.....without the gauge, I would be guessing and
from experience, that's not a very accurate way to know how much tension
is on the shrouds.
If you have rod rigging, the tension should never exceed 20% of the
breaking strength of the rod. My uppers are tensioned around 15% ,
lowers around 13% of the rod's breaking strength.
Rob Abbott
AZURA
C&C 32 - 84
Halifax, N.S.
On Thursday, May 18, 2017 8:19 AM, "Hoyt, Mike via CnC-List"
<cnc-list@cnc-list.com> wrote:
Does anybody have numbers for shroud tension on 33-2 using Loos Rt-10?
Thanks
Mike
For Colmonel
_______________________________________________
This list is supported by the generous donations of our members. If
you wish to make a contribution to offset our costs, please go to:
https://www.paypal.me/stumurray
All Contributions are greatly appreciated!
_______________________________________________
This list is supported by the generous donations of our members. If you wish to
make a contribution to offset our costs, please go to:
https://www.paypal.me/stumurray
All Contributions are greatly appreciated!
_______________________________________________
This list is supported by the generous donations of our members. If you wish to
make a contribution to offset our costs, please go to:
https://www.paypal.me/stumurray
All Contributions are greatly appreciated!