I agree. I moved to a Schaefer traveler on my C&C32. Neil Andersen, M.Sc., CISSP, CISM Auburn, NY 13021 _____________________________ From: Matthew L. Wolford via CnC-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> Sent: Tuesday, July 11, 2017 5:56 PM Subject: Re: Stus-List Traveler for C&C 35 Mk II To: <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> Cc: Matthew L. Wolford <wolf...@erie.net<mailto:wolf...@erie.net>>
FWIW, I have a Schaefer traveler and am very pleased it. It is robust but easy to operate. Don’t know about your hole spacing, but for my previous boat Schaefer sold me a length of undrilled track for my babystay so I could match it to the existing holes. From: Dennis C. via CnC-List<mailto:cnc-list@cnc-list.com> Sent: Tuesday, July 11, 2017 5:00 PM To: CnClist<mailto:cnc-list@cnc-list.com> Cc: Dennis C.<mailto:capt...@gmail.com> Subject: Re: Stus-List Traveler for C&C 35 Mk II Sean, I have Lewmar Ocean 1 ball bearing genoa cars and a Harken traveler. In my opinion, the Harken is superior. Harken does make a high beam variable spacing traveler track (Harken R32HB) which may fit your application. Harken tends to be a "bit" more pricey, however. Here's a link to Touche's traveler setup: https://drive.google.com/open?id=0B_sb5TfIENvsX0dGcEV2Mm1QNUE It has a 4:1 endless traveler sheet which passes through bulkhead mounted swivel cam cleats. It can be operated easily from forward or aft of the traveler. While I don't have experience with Garhauer travelers, many on the list speak highly of them. I have other Garhauer items on my boat and am positively impressed with them. I have also had Garhauer make custom items for both my boat and clients boats. Good stuff. A traveler that operates well is, in my opinion, a safety item. Many port/starboard collisions are partially to blame because a traveler would not drop quickly or a mainsheet would not release easily. The port boat was not able to turn down due to being extremely powered up. Dennis C. Touche' 35-1 #83 Mandeville, LA On Tue, Jul 11, 2017 at 2:00 PM, Sean Richardson via CnC-List<cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> wrote: Certainly seems Garhauer is the way to go Rick. What was the turnaround time like on your order? The Lewmar looks like it could be a quick “off the shelf” solution though. PS. The old pin stop is a PIA Sean C&C 27 MKIII LYNX On Tue, Jul 11, 2017 at 2:08 PM, Rick Brass via CnC-List<cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> wrote: Call Guido at Garhauer. He made the traveler for my 38 with a tall track and the car sized to fit the well in the bridge deck. The hole spacing was made to match the pattern of the OEM traveler track. The length was custom for the boat. The turning blocks and cleats for the 6:1 adjuster lines were angled to allow adjusting from the helm when single handing. No extra charge for all the custom work. And it probably cost less than half the cost of the Lewmar traveler. Rick Brass Sent from my iPad On Jul 11, 2017, at 10:11, Sean Richardson via CnC-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> wrote: Hi Sylvain, I’m looking to upgrade the original pin stop traveler on my 27 mkIII. How well did the Lewmar fit down in the original track recess and does it clear the cockpit lockers on either side no problem? Would you happen to have any pictures? Sean C&C 27 MKIII LYNX On Tue, May 2, 2017 at 7:37 PM, Sylvain Laplante via CnC-List<cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> wrote: Hi, you may also want to take a look at Lewmar, their #1 model is fine on my 27 ( up to 36 feet supposedly), it runs on Torlon bearings an requires no drilling. Price was 400 can$ 3 years ago. Sylvain C&C 27 mkIII Envoyé de mon iPhone Le 2 mai 2017 à 07:58, Joel Aronson via CnC-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> a écrit : I had a Harken. Garhauer is 1/3 the price. Joel On Tue, May 2, 2017 at 12:30 AM Jim Watts via CnC-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> wrote: Harken Big Boat Traveler system, if you have a spare G-note or two lying in between the cushions on your couch. The original Schaefer stuff is obsolete at best, and not worth repairing. Jim Watts Paradigm Shift C&C 35 Mk III Victoria, BC On 1 May 2017 at 19:10, Jean-Guy Nadeau via CnC-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> wrote: My track slide is very difficult to move. The wheels are worn and do not turn easily any more. Has anyone found a suitable replacement system or parts to repair the existing system? Cheers, J-G _______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated! _______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated! -- Joel 301 541 8551<tel:(301)%20541-8551> _______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated! _______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated! _______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated! _______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated! _______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated! ________________________________ _______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
_______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!