Dennis,

Admiral Bear was picked up almost 14 years ago at the now-gone Star Trek 
Experience at the Las Vegas Hilton — he’s been through quite a lot with us over 
the years and will always oversee operations on board the Enterprise. 

All the best,

Edd


Edd M. Schillay
Starship Enterprise
C&C 37+ | Sail No: NCC-1701-B
City Island, NY 
Starship Enterprise's Captain's Log <http://enterpriseb.blogspot.com/>




> On Aug 14, 2017, at 12:07 PM, Dennis C. via CnC-List <cnc-list@cnc-list.com> 
> wrote:
> 
> Is that a Mark 1 Mod 3 Seismoelectric Teddy Bear?
> 
> Dennis C.
> 
> On Mon, Aug 14, 2017 at 10:39 AM, Edd Schillay via CnC-List 
> <cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com>> wrote:
> I’m using the original C&C 37+ DC panel (with breakers behind), but I moved 
> my AC wiring up to where there was less moisture and relocated my battery 
> switch from the floor. Both the AC panel and battery switches are Blue Seas, 
> which I can’t recommend enough. 
> 
> Here is a photo of the current (no pun intended) setup on my boat: 
> https://dl.dropboxusercontent.com/u/15162917/ENTERPRISE/Electrics2017.jpg 
> <https://dl.dropboxusercontent.com/u/15162917/ENTERPRISE/Electrics2017.jpg> 
> 
> All the best,
> 
> Edd
> 
> 
> Edd M. Schillay
> Starship Enterprise
> C&C 37+ | Sail No: NCC-1701-B
> City Island, NY 
> Starship Enterprise's Captain's Log <http://enterpriseb.blogspot.com/>
> 
> 
> 
>> On Aug 10, 2017, at 3:51 PM, bwhitmore via CnC-List <cnc-list@cnc-list.com 
>> <mailto:cnc-list@cnc-list.com>> wrote:
>> 
>> Interesting, Josh as mine (94 37/40+), look nothing like yours.  I'll have 
>> to talk a photo...
>> 
>> 
>> 
>> Sent from my Verizon, Samsung Galaxy smartphone
>> 
>> -------- Original message --------
>> From: Josh Muckley via CnC-List <cnc-list@cnc-list.com 
>> <mailto:cnc-list@cnc-list.com>>
>> Date: 8/10/17 12:31 PM (GMT-07:00)
>> To: C&C List <cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com>>
>> Cc: Josh Muckley <muckl...@gmail.com <mailto:muckl...@gmail.com>>
>> Subject: Re: Stus-List Electrical panel
>> 
>> "Circuit breakers were not designed to be used as a switch, although we all 
>> do."  I never gave it much thought but it seems that the folks at C&C might 
>> have changed their methodology on the 37+.  I have a wide selection of 
>> "coffe pot" type switches at the switch panel on the nav station to turn 
>> on/off my electrical loads.  All the switches are wired to a bank of 
>> terminal boards which are powered from a series of circuit breakers.  It is 
>> rare for any circuit breakers to trip and unnecessary to operate them unless 
>> they do.  The terminal boards and circuit breakers are tucked neatly behind 
>> the nav station, during normal operation.
>> 
>> https://drive.google.com/file/d/0B8pEh5lnvP1yVzdkVFMyVGhqRjA/view?usp=drivesdk
>>  
>> <https://drive.google.com/file/d/0B8pEh5lnvP1yVzdkVFMyVGhqRjA/view?usp=drivesdk>
>> 
>> Josh Muckley 
>> S/V Sea Hawk
>> 1989 C&C 37+
>> Solomons, MD
>> 
>> 
>> 
>> 
>> On Aug 10, 2017 1:06 PM, "svpegasus38 via CnC-List" <cnc-list@cnc-list.com 
>> <mailto:cnc-list@cnc-list.com>> wrote:
>> Paul, 
>> Circuit breakers were not designed to be used as a switch, although we all 
>> do. Me included. This being used as a switch will cause them to fail over 
>> time. I believe you just had bad luck having 2 fail symotainiously. I like 
>> paneltronics stuff. because I have used it in the past, and they will custom 
>> build a panel for you. 
>> 
>> 
>> 
>> Sent from my T-Mobile 4G LTE Device
>> Doug Mountjoy 
>> POYC 
>> Pegasus  (for sale) 
>> Lf38 
>> Rebecca Leah 
>> LF39 
>> 
>> -------- Original message --------
>> From: Paul via CnC-List <cnc-list@cnc-list.com 
>> <mailto:cnc-list@cnc-list.com>>
>> Date: 8/10/17 09:54 (GMT-08:00)
>> To: 'Ron Ricci' <ron.ri...@1968.usna.com <mailto:ron.ri...@1968.usna.com>>, 
>> cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com>
>> Cc: paul.h...@rogers.com <mailto:paul.h...@rogers.com>
>> Subject: Re: Stus-List Electrical panel
>> 
>> My 2 problem breakers were from the 12v DC side of the panel.  The AC is the
>> left side and the DC is the right 2 sides. I have the main shut off switch
>> for the panel otherwise, there is not backup breaker for the DC.
>> 
>> Thanks,
>> Paul Hood
>> 416.799.5549 <tel:(416)%20799-5549> c
>> 
>> -----Original Message-----
>> From: Ron Ricci [mailto:ron.ri...@1968.usna.com 
>> <mailto:ron.ri...@1968.usna.com>] 
>> Sent: August 10, 2017 11:55 AM
>> To: cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com>
>> Cc: paul.h...@rogers.com <mailto:paul.h...@rogers.com>
>> Subject: RE: Stus-List Electrical panel
>> 
>> Were these on your AC panel?  I have ones provided by Paneltronics on my DC
>> panel but have to check my AC breaker ratings.  The ratings for some are 32
>> VDC and others are 80  VDC/250 VAC.  They look similar to your panel in
>> appearance.  So far, no problems.  Typically circuit breaker is rated for
>> interrupt amps and voltage.  Grossly exceed the load for the voltage rating
>> and they may not open.  You system should have a backup fuse or circuit
>> breaker rated for the maximum short circuit load.
>> 
>> I hope this is too much information and would try replacing the faulty
>> breakers.
>> 
>> 
>> Regards,
>> Ron
>> Ron Ricci
>> S/V Patriot
>> C&C 37+
>> Bristol, RI
>> 
>> ron.ri...@1968.usna.com <mailto:ron.ri...@1968.usna.com>
>> 
>> 
>> -----Original Message-----
>> From: CnC-List [mailto:cnc-list-boun...@cnc-list.com 
>> <mailto:cnc-list-boun...@cnc-list.com>] On Behalf Of Paul via
>> CnC-List
>> Sent: Thursday, August 10, 2017 11:12 AM
>> To: cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com>
>> Cc: paul.h...@rogers.com <mailto:paul.h...@rogers.com>
>> Subject: Stus-List Electrical panel
>> 
>> I have had 2 breaker switches in the panel malfunction in the same week.  I
>> don't know if they are original but I assume they are.  They are Airpax
>> Circuit Breaker UPG6-1-52-103-91. F.L10A. MAX 65VDC. DELAY 52.  They would
>> become intermittent and I would need to wiggle the toggle to make it work.
>> I bought 2 used replacements in the meantime but interested to know if you
>> would recommend new panels or chock it up to coincidence and leave it as-is.
>> I'll order another switch to keep on hand but looking for your thoughts.
>> 
>> https://drive.google.com/open?id=0Bw4NOPYfe9OWNE1yeXBSWkZfb2M 
>> <https://drive.google.com/open?id=0Bw4NOPYfe9OWNE1yeXBSWkZfb2M>
>> 
>> 
>> Thanks,
>> Paul Hood
>> 81 C&C34 - Refuge
>> Georgian Bay
>> 
>> 
>> 
>> _______________________________________________
>> 
>> This list is supported by the generous donations of our members. If you wish
>> to make a contribution to offset our costs, please go to:
>> https://www.paypal.me/stumurray <https://www.paypal.me/stumurray>
>> 
>> All Contributions are greatly appreciated!
>> 
>> 
>> 
>> _______________________________________________
>> 
>> This list is supported by the generous donations of our members. If you wish 
>> to make a contribution to offset our costs, please go to:  
>> https://www.paypal.me/stumurray <https://www.paypal.me/stumurray>
>> 
>> All Contributions are greatly appreciated!
>> 
>> _______________________________________________
>> 
>> This list is supported by the generous donations of our members. If you wish 
>> to make a contribution to offset our costs, please go to:  
>> https://www.paypal.me/stumurray <https://www.paypal.me/stumurray>
>> 
>> All Contributions are greatly appreciated!
>> 
>> 
>> _______________________________________________
>> 
>> This list is supported by the generous donations of our members. If you wish 
>> to make a contribution to offset our costs, please go to:  
>> https://www.paypal.me/stumurray <https://www.paypal.me/stumurray>
>> 
>> All Contributions are greatly appreciated!
> 
> 
> _______________________________________________
> 
> This list is supported by the generous donations of our members. If you wish 
> to make a contribution to offset our costs, please go to:  
> https://www.paypal.me/stumurray <https://www.paypal.me/stumurray>
> 
> All Contributions are greatly appreciated!
> 
> 
> _______________________________________________
> 
> This list is supported by the generous donations of our members. If you wish 
> to make a contribution to offset our costs, please go to:  
> https://www.paypal.me/stumurray
> 
> All Contributions are greatly appreciated!

_______________________________________________

This list is supported by the generous donations of our members. If you wish to 
make a contribution to offset our costs, please go to:  
https://www.paypal.me/stumurray

All Contributions are greatly appreciated!

Reply via email to