I was wondering if there could be a negative impact to use a Ss elbow that may not have the same internal dimension and thus affecting the flow and performance of the engine. But I may be overthinking this...
Other thoughts out there or experiences to share on this matter ? Thanks Bruno Lachance Bécassine, 33 mk II New-Richmond, Qc Bruno. Envoyé de mon iPad Le 28 août 2017 à 20:34, John and Maryann Read via CnC-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> a écrit : We replaced ours 2 years ago – mechanic recommended the cast iron version, and not to use the stainless. Don’t remember the exact reason why but believe it had to do with the rusting of the cast iron was indicative an internal issue John and Maryann Legacy III 1982 C&C 34 Noank, CT From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Bruno Lachance via CnC-List Sent: Monday, August 28, 2017 10:15 AM To: cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com> Cc: Bruno Lachance Subject: Stus-List Exaust elbow replacement Hi all, I know from this list that i could replace my exaust elbow (yanmar 2 GM 20F) with a stainless steel copy available online. Is there a reason why i should go with an original yanmar part ? and if the collective wisdon is to replace with SS. Where is the best place to order if i'm in Canada. For both quality and price. Thank you very much. Bruno Lachance Bécassine, 33 mk II New-Richmond, Qc _______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
_______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
