Try garhauer, we had them fabricate a gooseneck for perception years ago. Talk to Guido.
Get Outlook for iOS<https://aka.ms/o0ukef> ________________________________ From: CnC-List <cnc-list-boun...@cnc-list.com> on behalf of Al Serrato via CnC-List <cnc-list@cnc-list.com> Sent: Wednesday, September 13, 2017 5:00:44 PM To: cnc-list@cnc-list.com Cc: Al Serrato Subject: Stus-List Mast Gooseneck Fitting The metal gooseneck fitting on the mast of my '34 failed. It attaches to the mast via 4 screws on each side. One of the two metal loops that accepts the boom end broke off. I have only gotten one estimate so far based on the photo I sent to my usual boatyard, of $1100, to remove, fabricate and replace. I'm waiting to hear back from some rig shops. I haven't tried to remove the piece myself but am guessing I won't be able to with hand tools, and I'm worried about stripping the screw heads. Does anyone have a suggestion as to how to repair/replace without spending so much? Is there a market out there for used pieces like this? Any help would be appreciated. Al Serrato Senza Fine 1981 '34 San Francisco Bay Sent from my iPad _______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
_______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!