Hi Randy, a common wiring configuration has a positive wire coming from the starter stud to the ignition switch in. The ignition switch out feeds the ignition coil, starter button and gauges. If you pull the ignition switch on it should move the fuel gauge, ignition off might return the gauge to empty.
If so that will confirm power is getting to and through the ignition switch. Michael Brown Windburn C&C 30-1 Date: Mon, 18 Sep 2017 17:15:08 -0600 From: Randy Stafford <randy.staff...@comcast.net> To: cnc-list@cnc-list.com Subject: Re: Stus-List A4 Cutting Out Message-ID: <8f1bd72a-bd6e-4e04-b0a3-4e09edff3...@comcast.net> Content-Type: text/plain; charset="utf-8" Hi Doug, No noise whatsoever when I pushed the starter button. It was as if there wasn?t enough current to activate the starter, but the batteries *did* have enough charge at the time. Cheers, Randy
_______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!