I did this years ago when the iron/steel plates C&C used were rusting to pieces. It was not complicated, I took two of them (big ones and smaller forward one) to the local shop and they made stainless versions. They are just rectangles with holes in them. Joe Coquina C&C 35 MK I
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Glen Eddie via CnC-List Sent: Tuesday, October 3, 2017 12:32 PM To: Liz Mather via CnC-List <cnc-list@cnc-list.com>; cnc-list@cnc-list.com Cc: Glen Eddie <ged...@torkinmanes.com> Subject: Re: Stus-List Keel backing plates and washers replacement 35-1 There is a guy in the toronto area that will prefab the backing plates etc and install them for you. I will look for his name. From: Liz Mather via CnC-List Sent: Tuesday, October 3, 2017 12:28 PM To: cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com> Reply To: cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com> Cc: Liz Mather Subject: Stus-List Keel backing plates and washers replacement 35-1 Good Morning! I have a question actually looking for opinion and experiences replacing the keel backing plates, washers complete. Thinking of replacing backing plates with 400 series stainless. I was searching the list for previous discussions, found some but just looking for as much info as possible. Also wondering about lubricant, loctite suggestions, opinions. Most importantly looking for torque info, tables etc. So grateful for any info and responses! Best Regards, Liz Mather Mistral V C&C 35-1 Midland Glen Eddie Tel: 416-777-5357 Fax: 1-888-812-2557 Torkin Manes LLP Barristers & Solicitors This email message, and any attachments, is intended only for the named recipient(s) above and may contain content that is privileged, confidential and/or exempt from disclosure under applicable law. If you have received this message in error, please notify the sender and delete this email message. Thank you. _______________________________________________ The bills have started coming in for the year 2018 and have gone up again. October will be our fund raising month. Please consider sending a small contribution to help keep this list running. Use PayPal to send contribution -- https://www.paypal.me/stumurray All contributions are greatly appreciated!
_______________________________________________ The bills have started coming in for the year 2018 and have gone up again. October will be our fund raising month. Please consider sending a small contribution to help keep this list running. Use PayPal to send contribution -- https://www.paypal.me/stumurray All contributions are greatly appreciated!
